以Cyanex272为载体的乳状液膜迁移和分离铅的研究

用Ｃｙａｎｅｘ２７２－Ｓｐａｎ８０－甲苯乳状液膜体系研究了铅的迁移行为，确定了铅迁移的适宜条件。在此条件下，许多常见离子如Ｃｕ＾２＋、Ｃｏ＾２＋、Ｎｉ＾２＋、Ｃｄ＾２＋等均不迁移，Ｈｇ＾２＋迁移率很低。因此Ｐｂ＾２＋能与这些离子得到快速且完全的分离。这对分析测定及三废处理等工作具有实际意义。     

壳脑酸酯溴化反应性质及在虫胶漂白中的应用

运用紫外分光光度法和波谱分析法研究了壳脑酸酯溴化反应的动力学性质和产物及脱溴产物的结构，结果有，壳脑酸酯溴化反应是二级反应是二级反应，反应活化能是６６．４ＫＪ／ｍｏｌ，产物是α，β－二溴壳脑酸酯，该产物的脱溴产物是β－溴壳脑酸酯。     

CoOx改性TiO2光催化剂的制备、优化及其光催化分解水析氢性能研究

利用热分解法制备了不同掺杂量的CoO_x-TiO₂系列光催化剂, 并优化了制备方法。在用XRD、TEM和XPS等技术对催化剂表征的基础上，探讨了乙醇作为电子给体时CoO_x改性对P25-TiO₂光催化分解水析氢性能的影响。本文还利用连续瞬态电流-时间响应和循环伏安法等电化学方法，考察了CoO_x-TiO₂改性系列光催化剂光照条件下电流响应强度、起始光电响应特性差别及光催化析氢电位变化等光电化学性能。光催化性能实验结果表明，适当掺杂CoO_x(110～400 ℃焙烧时最佳掺杂量约为0.4wt% Co，500 ℃焙烧时最佳掺杂量约为0.6～0.8wt% Co)能够显著地提高TiO₂析氢光催化性能，产氢速率提高2个数量级。另外在适当温度下的热处理，能够改善催化剂光催化性能(最佳处理温度为300～400 ℃)。光电化学性能评价结果表明，适当掺杂CoO_x和适当温度下焙烧能在催化剂表面形成较多的析氢活性物种——含钴复合物，能有效增强催化剂光电流响应强度，并使得析氢光还原电位向有利于析氢方向位移。高含量掺杂CoO_x会在催化剂表面形成某种碳化物物种，大量含钴复合物活性中心的出现会降低光吸收效率，增加TiO₂表面光生电子-空穴复合率而使催化剂失去析氢光催化性能。     

Ab initio study of the complexes of halogen-containing molecules RX (X=Cl, Br, and I) and NH3: towards understanding the nature of halogen bonding and the electron-accepting propensities of covalently bonded halogen atoms

Ab initio calculations have been performed on a series of complexes formed between halogen-containing molecules and ammonia to gain a deeper insight into the nature of halogen bonding. It appears that the dihalogen molecules form the strongest halogen-bonded complexes with ammonia, followed by HOX; the charge-transfer-type contribution has been demonstrated to dominate the halogen bonding in these complexes. For the complexes involving carbon-bound halogen molecules, our calculations clearly indicate that electrostatic interactions are mainly responsible for their binding energies. Whereas the halogen-bond strength is significantly enhanced by progressive fluorine substitution, the substitution of a hydrogen atom by a methyl group in the CH(3)X...NH(3) complex weakened the halogen bonding. Moreover, remote substituent effects have also been noted in the complexes of halobenzenes with different para substituents. The influence of the hybridization state of the carbon atom bonded to the halogen atom has also been examined and the results reveal that halogen-bond strengths decrease in the order HC triple bond CX > H(2)C=CHX approximately O=CHX approximately C(6)H(5)X > CH(3)X. In addition, several excellent linear correlations have been established between the interaction energies and both the amount of charge transfer and the electrostatic potentials corresponding to an electron density of 0.002 au along the R-X axis; these correlations provide good models with which to evaluate the electron-accepting abilities of the covalently bonded halogen atoms. Finally, some positively charged halogen-bonded systems have been investigated and the effect of the charge has been discussed.     

Analysis of acyclovir by high performance capillary electrophoresis with on-column amperometric detection

The separation of acyclovir (ACV) by high performance capillary electrophoresis (HPCE) with on-column amperometric detection using alpha-amino-5-mercapto-3,4-dithiazole (AMD) as internal standard is described. The calibration line was linear in the range of 0.5-20 mg/L of ACV. The detection limit was 0.15 mg/L of ACV. Its recovery ranged from 98 to 101% with relative standard deviations (RSDs) from 1.9 to 3.2% (n = 5). This method was successfully used for determining ACV in some pharmaceuticals and human urine. Comparable results with HPCE with ultraviolet (UV) detection and amperometric detection were obtained.     

高效液相色谱/串联质谱法快速鉴定Z/E盐酸头孢吡肟异构体

采用高效液相色谱/串联质谱技术建立了快速鉴定Z型盐酸头孢吡肟原料药中E型异构体杂质的新方法。以乙腈-醋酸盐缓冲溶液(4∶96)为流动相经C18柱分离,通过高分辨电喷雾串联质谱在线检测,获得了相关的色谱和质谱信息。在所建立条件下,Z型盐酸头孢吡肟及其E型异构体杂质获得了有效分离,保留时间分别为5.22 m in和14.60 m in,同时它们的二级质谱及裂解方式呈现明显差异。本法能在无对照品情况下,快速、准确地分离鉴定盐酸头孢吡肟原料药中的Z/E异构体。     

气相色谱-质谱法测定茶叶中的噻嗪酮残留量

建立了气相色谱-质谱法测定茶叶中噻嗪酮残留量的方法。茶叶中残留的噻嗪酮用丙酮-正己烷混合溶剂(1∶1)提取,提取液经Envi-Carb活性碳柱和LC-Alumina N中性氧化铝柱净化,浓缩定容后,直接用气相色谱-质谱进行分析和确证,外标法定量。以HP-5MS(30m×0.25mm i. d., 0.25 μm)石英毛细管柱为分离柱,噻嗪酮的分离效果良好。方法的线性范围为0.01～1.00μg/mL,检出限为0.01mg/kg,回收率为81.6％～97.2％,相对标准偏差为3.36％～5.78％。质谱监测离子选m/z为105、140、172、305amu,其强度比约为41∶13∶29∶17。样品前处理采用微量化学技术。     

铽(Ⅲ)-1,4-双(1′-苯基-3′-甲基-5′-氧代吡唑-4′-基)丁二酮-[1,4]体系荧光性质的研究及应用

本文研究了Tb(Ⅲ)-1,4-双(′-苯基-3′-甲基-5′-氧代吡唑-4′-基)丁二酮-[1,4](BPMPBD)-溴化十六烷基三甲胺(CTMAB)体系的荧光性质,探讨了响影体系荧光性质的诸因素,确定了最佳实验条件。该体系中Tb(Ⅲ)浓度以2.0×10~(-5)～1.0×10~(-10)mol/L范围内与其荧光强度呈线性关系,检测限可达到5.0×10~(-11)mol/L。应用于合成样品中微量Tb(Ⅲ)的分析,结果令人满意。     

接枝共聚物氯化聚乙烯—苯乙烯对聚苯乙烯的共混改性

用氯化聚乙烯接枝苯乙烯共聚物（ＣＰＥ－ｇ－Ｓｔ）和氯化聚乙烯（ＣＰＥ）对聚苯乙烯（ＰＳ）进行共混改性。当ＣＰＥ含量为２５％时，用ＣＰＥ－ｇＳｔ改性的共混物的冲击强度为１８．５ｋＪ．ｍ＾－＾２，是用ＣＰＥ改性的共混物冲击强度的２．１倍；其拉伸强度不低于３４ＭＰａ。